When submitting the Data Sheet with a blueprint: PRINT THE DATA SHEET
  • You may skip sections 1, 2, and 4.
  • You must answer #3.
  • If fixture locations are shown on the print, when selecting items in #5 do not select a location for the items
    that will be included in your plan. Select a location for the items in this section ONLY if you want that
    particular item in a specific place. Be sure to include the label (A, B, etc) on the blueprint to coincide with
    your selection placement.
  • Complete Sections 6 & 7 if applicable
  • Be sure to add your contact information on the form (name & e-mail are mandatory)
  • Fax the Data Sheet along with your blueprint.
sendreset


MAIL-IN & FAX-IN WORKSHEET
Use as a guide for entering data and labeling all areas required.
For each section, you may add or eliminate all that applies or is not applicable.
1. WALL DIMENSIONS
(required)
Enter in inches, the dimension for each corresponding area on the floorplan.
IF SUBMITTING A SCALED DRAWING YOU MAY SKIP THIS STEP.
BE SURE TO LABEL YOUR DRAWING WITH THE CORRESPONDING WALLS.


Wall 1: Wall _2: Wall _3: Wall _4:
Wall 5: Wall _6: Wall _7: Wall _8:
Wall 9:

2. RETURN WALLS (required)
Are there walls at the end, enclosing the cabinets?
BESURE TO LABEL YOUR DRAWING WITH THE CORRESPONDING RETURN WALLS.


Return Wall 1 Yes No
OTHER_________________________________


3. CEILING HEIGHT (required)
Select your ceiling height and cabinet application.

8FT CEILING
8ft with soffit 8ft with crown 8ft stagger 30in and 36in to ceiling
8ft 36in with crown to ceiling 42in
9FT CEILING 9ft 36in with crown 9ft stagger heights 36in and 42in 9ft 42in with crown

4. WALL OPENINGS (required)
Indicate all openings (doors, windows, pass-thru).
BE SURE TO LABEL YOUR DRAWING WITH THE CORRESPONDING OPENINGS.

OPENING 1
none door window pass-thru
OPENING 2 none door window pass-thru
OPENING 3 none door window pass-thru

5. FIXTURE LOCATIONS (required)
Indicate all plumbing fixture and appliance locations.


MAIN SINK none single bowl double bowl apron other
none Wall A Wall B island peninsula other
PREP SINK none 12in 15in other
PLACEMENT none Wall A Wall B island peninsula other
DISHWASHER none standard 24in single drawer double drawer other
PLACEMENT none Wall A Wall B island peninsula other
RANGE none 30in 36in 42in 48in other
none Wall A Wall B island peninsula other
COOKTOP none 30in 36in other
PLACEMENT none Wall A Wall B island peninsula other
RANGETOP none 30in 36in other
PLACEMENT none Wall A Wall B island peninsula other
WALL OVEN none 27in single 30in single 27in double
30in double other
PLACEMENT none Wall A Wall B other
WARMING DRAWER none 30in other
PLACEMENT none Wall A Wall B other
MICROWAVE none 30in on shelf 30in micro vent 36in micro vent
24in micro drawer 30in micro drawer with wall oven seperate
with wall oven combined other
PLACEMENT none Wall A Wall B other
VENTILATION none 30in 36in 30in micro 36in micro
30in deco 36in deco wood hood other
PLACEMENT none Wall A Wall B other
REFRIGERATOR none 30in 33in 36in
30in built-in 36in built-in 42in built-in 48in buil-tin other
PLACEMENT none Wall A Wall B other
WINE COOLER none 24In other
PLACEMENT none Wall A Wall B island peninsula other
ICE MAKER none 15in other
PLACEMENT none Wall A Wall B island peninsula other
TRASH COMPACTOR none 15in other
PLACEMENT none Wall A Wall B island peninsula other

6. ADDITIONAL INFORMATION (required - enter "none" if n/a)
Enter all additional information that will have an impact on the plan.
This could be a restriction due to plumbing or appliance location, duct chases, height, etc.
Include here all colors being used if ordering one of our color DESIGN PACKAGES.




7. ADDITIONAL AMENITIES (optional)
The following are not required to design a generic plan. However, check all
that apply, so we may advise you if applicable in a Recommendation Report.


Appliance Garage Corbels Crown Molding Desk Doors for Glass
Garbage Pullout Lazy Susan Light Rail Matching Deco Panels Mullion Doors
Pot & Pan Drawers Rollout Trays Spice Rack Split or Full Posts Towel Bar
Tray Storage Base Utility Storage Wine Rack/Stemware Holder

Name: (required)............ EMail: (required)
BE SURE TO INCLUDE YOUR NAME & E-MAIL ADDRESS

Copyright © 2010 ProKitDesign